Login or Register
Shopping Cart

Bannatyne Dri Flow Drone Moisture Control System

Bannatyne Dri Flow Drone Moisture Control System

Bannatyne Dri Flow Drone Moisture Control System

1 Review(s) Write a Review

Your Price: $78.95

This, easy to install silica based system fits into the drone stock with or with out the rubber cups that are included with product. Over the last two years, pipers using this device have won first prizes at every senior professional event. There are several players currently using the product, including Willie McCallum and Callum Beaumont, who are at the forefront of solo competing.

Questions about this item? Ask here.

Part Number: MC18

Availability: Usually Ships in 24 Hours.

Quantity

Description
Customer Reviews
Questions and Answers

Major Features of the system
• Longer playing time, keeps drone reeds and drones dry
• Excellent Air Flow to drones with unaffected drone volume
• Lightweight compared to other systems
• Easy visual check when gels need dried
• Starts and Stops are straightforward with no valves
• Easy to Install and Remove
• Suitable for any climate
• Gels have 70% absorption giving longer playing time in between drying
• No dust particles
• Strong flexible hoses prevent collapsing.

Q: How do you take the end caps off to empty the crystals? I'm trying a butter knife, and only succeeded in starting to stretch the plastic pipe...

Asked by: piper Elise - 5/20/2020

A: In order to remove the Dri Flo System, you would pull on the elbow that inserts into the rubber cup, leaving the rubber cup attached to your drone stock. Once you have the tube holding the crystals with the elbow on the tube, you would then remove the cap off of the other end of the tube. I find that by pinching the tube a bit that it makes it easier to pop off the cap. Then empty the crystals into an oven safe plate and put them into a very low temp oven until the moisture is evaporated from inside the crystals.

Was this answer helpful? 1 of 1 Customer(s) found this Answer helpful.

Answer provided by: Jon Maffett (5/20/2020)

Submit an answer

Q: Will this system fit into an extended small bag and is the extra bag of gel for all three tubes?

Asked by: John Finnegan - 8/5/2019

A: Yes, the gels are enough to refill all tubes, a yes, it will fit inside a small bag!

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Jon Maffett (8/5/2019)

Submit an answer

Q: i have bought the dri flo system bannatyne, ok , but i do not understand, how to do, when you say on the "notice " ......YOU HAVE TO HEAT THE GELLS ,,,????? I DONT UNDERSTAND AT ALL, ....Is it necessary to heat the gells ? How ? yOUR MAN ON iNTERNET WEBSIDE? DOESNT EXPLAIN THIS WELL ???? I need your help ....The gells has arrived here , with the gells in the 3 tubes.... Can i play soon like that , or must i th warm, to heat the gells ? I dont understant? PLEASE? COULD YOU HELP ME .....THANKS AGAIN , yves-marie .

Asked by: Yves-Marie LE CORRE - 12/1/2019

A: After you have played your pipes, with the gels in the tube, and you notice that you have moisture forming on your drone reeds, you will need to remove the tubes, remove the gels from the tubes, place it in a sheet pan and place the pan in an oven set on a low heat in order to evaporate the moisture collected in the gels. This is better then using a microwave which will make the gels crack due to heating the water to quickly

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Jon Maffett (12/1/2019)

Submit an answer

Q: How much gells do you have to put in each tube ? Must each tube be full of gell ? complitely full gell ? or how much gell ? its not clear for me at all .... I need help , please.....wY DO YOU SAY " THE GELLS HAVE TO BE WARMED " Yves-marie ...

Asked by: Yves-Marie LE CORRE - 12/1/2019

A: It really all depends on how wet of a blower you are. I just fill them all the way.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Jon Maffett (12/1/2019)

Submit an answer

Q: Okay, after lengthy experimentation, I finally came up with a technique to get the caps off. I went to YouTube and added my solution to the Comments beneath their instructional video for this product. That was so that other people unable to use the caps could enjoy success using their product. I see that they have now hidden the comments!! The reason I know that is because, after getting the caps off, my next step was installing the flexible tube caps onto my stocks. Could not do that either! Probably more difficult on my pipes, since they are MacLellans (very thick everything, including stocks), and because I'm a female installer. After about a half-hour of experimentation, I figured out a way to get the rubber caps onto the stocks. My hands are exhausted, but it worked. So I went back to the video to add how to do that, for benefit of other female pipers and people with big stocks, and that's when I discovered my earlier Comment was hidden and I could not communicate any more! Well, that's just silly. If other people receiving the problem have the same troubles I've experienced, they will either break the pieces trying to do what I did, or just get frustrated and issue a return, and then talk badly about the product to their fellow pipers!!! It would be a lot smarter to preserve my comments (which were entertaining), and let me add the solution for how to install the rubber caps. Please pass this opinion on to Bannatyne or whoever might have posted that video. I think they

Asked by: piper Elise - 5/20/2020

A: Thank you for sharing your experience. We will be sure to pass this information along.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Jon Maffett (5/20/2020)

Submit an answer

Q: I bought the bannatyne dri-flo system about 1 yr ago. I don't use the rubber cups, but have hemped the ends and put them directly into the stocks. I also use a bannatyne bottle water trap. For some reason my drone reeds are now getting very wet and are extremely unstable as a result. This happens within 5 minutes of my beginning to play. I don't play that often so I know the gel is dry. Any suggestions on what I can do? Thanks.

Asked by: Bob Mason - 9/10/2019

A: You will need to place the Gels in a low temp. oven to dry the gels out.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Jon Maffett (10/11/2019)

Submit an answer

Q: The instructions say to dry the gels at 160 degrees C. That converts to 320 degrees F. John, you say to dry them in a warm oven. 160C/320F seems too hot to me. Any suggestions on the correct temperature setting for drying the gels please.

Asked by: Steve - 6/28/2022

No Answers have been submitted yet.

Submit an answer

Q: What temperature setting do you suggest for drying the gels in a regular gas oven? "Warm" is a little vague. The instructions say 160 degrees C which converts to 320 degrees F. That seems a lot hotter than just WARM.

Asked by: Stephen Coyne - 6/28/2022

No Answers have been submitted yet.

Submit an answer

Questions about this item? Ask here.

G1 Platinum Chanter Reed

G1 Platinum Chanter Reed

(4)

$19.95

Usually Ships in 24 Hours.

Balance Tone Drone Reed

Balance Tone Drone Reed

(2)

$89.95

Usually Ships in 24 Hours.

Canning Poly Bass Drone Reed Set

Canning Poly Bass Drone Reed Set

(0)

$108.95

Usually Ships in 24 Hours.

Q Practice Chanter Reed

Q Practice Chanter Reed

(0)

$9.95

Usually Ships in 24 Hours.

Deluxe Soft Drone and Chanter Brush Set

Deluxe Soft Drone and Chanter Brush Set

(0)

$17.95

Out of Stock.

Nylon Bagpipe Cleaning Brush set of 4

Nylon Bagpipe Cleaning Brush set of 4

(0)

$14.95

Usually Ships in 24 Hours.

BAGPIPE SUPPLIES > Moisture Control

TOP